Safe, efficient, easy, perfect
A TegoDeck Roofing Board panel used to cover and seal the roof of any building
1.
Increases the rigidity of the roof
Reinforces the roof structure by connecting the load-bearing beams to each other, thus increasing bearing capacity and reducing the effects of dynamic load(wind and earthquakes) on the roof structure.
Innovation
- Unique combination of “L” shiplap joints and tongue and groove profile with integrated expansion space of 2 mm.
- Quick and easy installation thanks to the “fold in & slide” system or “plug in & slip”.
- A slight compensation of the height differences of the rafters is feasible.
- Allows continuous installation thanks to the “tongue and groove” self-supporting joint on the short side of the panel.
Cost and time savings
- Faster laying compared to the traditional OSB panel reduces the application costs by up to 30%.
- No additional H-hooks are required on the horizontal “shiplap” joint.
- Allows you to make the joints not only at the bearing joists, but wherever necessary, thus minimizing scraps and panel cutting work.
2.
Improves sound insulation
It reduces noise from the outside and from impacts (rain, hail), improving the acoustics of inhabited areas such as the attic space.
3.
Accommodates panel expansions
Standard OSB panels, in order to absorb the dilatations due
to the variation of humidity, must be applied with a gap of 2mm between adjacent panels.
With TegoDeck Roofing Board this gap is already built-in thanks to the jointing system.
5.
Seal
The interlocking panel system provides a seal which can also protect against penetration by insects and rodents into the roof .
6.
Stability
Ideal base for easy installation of the roof covering, and
roof windows, skylights, vents, etc.
7.
Safety
It is the ideal base for all mechanical or flame applied coatings.
4.
Protection
Turns the roof into a pedestrian area both during construction and for any future maintenance access.
TegoDeck Roofing Board is easy and safe to transport on the roof, fast to lay in place thanks to greater manoeuvrability and speed
of installation.
Safety
- High load-bearing capacity and panel rigidity.
- Moisture resistant gluing.
- Rated as safe for a pointload with 100 kg man-weight between the rafters up to 600 mm distance, in accordance with EN 12871.
- Safe seal from the second row of the panels installed until the installation of the entire roof is complete.
Practicality
- Reduced panel width 60 cm for a secure grip and easy transport to the roof. TegoDeck Roofing Board can be transported by a single person.
- Thanks to the reduced weight of about 12 kg the panel can be transported and installed by a single person.
Find out more about the details and request the catalogue.
REQUEST
© 2019 Tegola Canadese S.p.A.
Via dell’Industria, 21
31029 Vittorio Veneto (TV) - Italy
P.IVA 00449930262
Ph. +39 0438 9111
info@tegolacanadese.com
PRIVACY POLICY
Powered by Quba - Comunicazione strategica